Best Line Tooling Sdn Bhd
15A, Jalan NB2 1/1,
Taman Nusa Bestari 2,
81300 Skudai,
Johor, Malaysia.
15A, Jalan NB2 1/1,
Taman Nusa Bestari 2,
81300 Skudai,
Johor, Malaysia.
+607-5589849
+6014-9882372 (Ms.Zixuan)
+6014-9882372 (Ms.Zixuan)
+607-5549849
Bifix
Previous | 4 / 4 | Next |
Bifix® is a high precision, indexable blade reamer suitable for all material groups.
The range covers diameters from 5,90 - 60,50 mm. A hole tolerance of IT6 and a surface finish of Ra 0,25 can be achieved thanks to a design incorporating three Cermet guide pads and an accurate adjusting system.
The original clamping design ensures an efficient and stable blade clamping. Bifix® also features internal through coolant channels.
- High quality
- Good guiding system using three Cermet guiding pads
- Adjustable reamer achieving high precision (IT5 / IT6)
- Extreme surface finish using double lead angle 15/3 degrees - Versatile
- Indexable blades
- Optimised geometries and blade grades for different work piece materials
- Double lead angle 30/3 degrees - suitable for most materials
- Two coolant designs for through holes (pushing chips forward) and blind holes (pushing chips backwards) - Production security
- Strong clamping system with two clamps
- Optimal chip evacuation
- Short lead angle with end cutting for blind bores when bottom cut is required - Productivity
- Cermet grade for optimisation in steel - Cost effective
- Indexable blades with two cutting edges per blade
- Lowest carbide cost